Review the condition
Photos and an on-site conversation help us understand what is already there.
Outdoor living
Deck repair, porch building, and steps in Denton County.
We plan decks, porches, stairs, rails, repairs, and rebuilds around how you want to use the space and what the existing site allows.
What we can discuss
A scope built around this home and this project.
The right plan depends on the existing condition, access, materials, priorities, and how connected work should be handled. We start by understanding those details.
New decks and porchesRepairs and resurfacingSteps and landingsRails and suitable covers
What to expect
Repair, resurface, or rebuild
Most deck calls start with the boards, because that is what you can see. The boards are rarely the deciding factor. What matters is the framing underneath, the connections holding it together, and how the structure meets the house—because a deck with sound framing and tired decking is a resurfacing job, while a deck with compromised connections is not a repair at any price.
Resurfacing means new decking and rails on existing framing. It only makes sense when the joists, beams, posts, and footings are sound and the layout still works. A rebuild becomes the honest answer when framing is deteriorated in more than isolated spots, when the ledger attachment to the house is inadequate, when posts and footings have moved, or when the structure was never built to carry what is on it.
What we inspect before recommending anything
We look at the ledger and its flashing where the deck meets the house, because that connection is both the most safety-critical detail and the most common source of hidden water damage. Then the posts and footings and whether they have shifted, the beam-to-post and joist-to-beam connections and their hardware, joist condition at the ends where rot starts, rail posts and their attachment, and stair stringers and treads.
Corrosion matters more than it looks. Fasteners and hardware in contact with treated lumber degrade if the wrong type was used, and that is invisible until something is pulled apart. Soft spots near the house, springiness underfoot, and rails that move when you lean on them are the symptoms worth calling about.
Wood and composite in North Texas conditions
Pressure-treated pine is the least expensive to build and the most demanding to maintain: it needs cleaning and resealing on a cycle, and it moves with our humidity swings. Cedar looks better and resists decay naturally at a higher material cost. Composite and PVC remove the refinishing cycle and hold appearance far longer, at a higher price and with real differences in how hot the surface gets in direct sun—worth thinking about for a south- or west-facing deck used barefoot in July.
North Texas is hard on all of it. Long stretches of intense sun, sharp temperature swings, heavy rain events, and expansive clay soils that move seasonally. Material choice, fastener choice, drainage, and footing depth all get decided against those conditions rather than a catalog.
Steps, landings, and mobile-home decks
Steps and landings are their own product and a common request on manufactured homes, where they are usually freestanding rather than attached to the house and often sit on ground that moves. Rise and run consistency, solid landing support, graspable handrails, and a footing approach that tolerates seasonal movement matter more here than appearance.
We take these as standalone jobs. A set of steps that has become unsafe is worth fixing on its own schedule rather than waiting for a larger project.
Permits and what the scope covers
Deck work frequently requires a permit and inspection depending on the jurisdiction, and requirements differ between cities and unincorporated county areas. We identify what applies for your address and coordinate it as part of the project rather than leaving it as your problem to discover.
The written scope states the structure and materials, what happens to the existing deck and its debris, how the ledger and footings are handled, what is excluded, and what happens if opening the structure reveals conditions the price did not assume. On a deck, that last clause matters—what is under the boards is genuinely unknown until they come up.
A clearer project
Plan the work before the work starts.
We make room for questions, surface tradeoffs, and document the agreed responsibilities so you can make a confident decision.
Discuss the options
We talk through priorities, material choices, constraints, timing, and connected work.
Confirm the scope
The agreed work and project-specific responsibilities are put in writing.
Plan with better context
Useful before the estimate.
Common questions
A straightforward place to start.
Do you build with wood and composite?
Yes. We discuss appearance, maintenance, heat, budget, and compatibility before a material is selected.
Can an existing deck be repaired instead of rebuilt?
Sometimes. We first look at the framing, connections, movement, and overall condition before recommending a path.
How far does TrueBuilt travel?
We generally consider projects within about 100 driving miles of Justin. Location, scope, timing, and project fit all affect availability.
Ready when you are
Let’s make the next step clear.
Tell us what you want to repair, finish, or build. We’ll review the details and follow up within one business day.